PC BUILDING PART -1

WHAT IS PC BUILDING AND HOW IT IS DONE ?

WHAT IS PC BUILDING WHY WE DO?

    PC building, most of the people ask me, why do we want to built a pc, we can buy an assembly set pc's on go and can also buy a pc for our desired specs and work we want to do.  You can also find pre-built pc's in many online shopping websites like amazon, Flipkart etc., Why do I want to build a PC?

   Main reason You want Build PC on Your own :

• High Costing for Pre-built pc's.
• Not getting a good productivity.

   Some would say why should I built pc I can buy a laptop for 50k and move on with it but lifetime of laptop is less when compared to that of pc and single component failed in lap service centre would charge big amount some of us can solve and overcome the problem but 50% of the people doesn't so they need a reliable not cost effective and easily exchange able faulty one at low cost.

PC build's are mostly done for Productivity (video and picture editing), Gaming and streaming and  also for work from home office purposes. It is also easier and cheap maintain our software and hardware for extended periods of time, and also allows us to fine tune both hardware and software.

WHAT ARE THE MAIN COMPONENTS NEEDED FOR OUR PC BUILD ?

• PROCESSOR.
• MOTHERBOARD.
• RAM.
• STORAGE DEVICES.
• GPU(Graphics card or video card if you need).
• SUITABLE COOLER FOR PROCESSORS.
• SUITABLE CABINET.   and
• OUTPUT DEVICES like (monitor, keyboard, speaker, mouse, printer).

DO'S AND DONT'S WITH PROCESSORS

   There are two types of processors that you can buy one is INTEL and another one is AMD.  In My opinion if you need high end graphics and game playing and other productivity and if your purse is some what bulgier than other's I would recommend you to go INTEL processors or if you hesitate on spending too much money on this processor and you are planning for a good budget and performance PC.  I would recommend AMD processors.

     

    As they are the budget and good performing processors cheap and reliable and you don't want to buy cooler worth of 2.5k  AMD processors come with stock-coolers which is more than enough but in INTEL there are budget processors but would perform effectively like AMD processors but INTEL don't come with stock coolers and processor pricing is too high compared to that of AMD.

    Most important is the install the processor carefully and if we install it in wrong manner processor pins may bend and  motherboards slot may be damaged.

INSTALLATION PROCESS   

• Place your processor in a position in which the processor's arrow mark matches the arrowmark in motherboard.
• Then close the clip to secure the processor.
• Install heat sink by using thermal paste and install the cooler above the processor.  
• Process finished.

Can't follow above instructions do watch this video on installing the Processor

DO'S AND DONT'S WITH MOTHERBOARDS

    First you need to know about the motherboard is that it is the main component for the PC build because it holds all the other components like processor, GPU, RAM, ROM.  So be wise and calculative in your selection on motherboard take a guidance from any service centre or persons well versed in Pc building.

    There are two types of motherboards for INTEL & AMD.  We can easily identify them by their chipsets which is used in the Motherboards, there are motherboards which come with in-built Wifi and Bluetooth chips and services which are regularly costly but reliable. 

     So Motherboards varies mainly in Form Factors ATX(Advanced Technology eXtended), m-ATX, ITX

We can also provide Wifi and Bluetooth Usb adapters also it is also reliable and cost-effective. There are different type of socket motherboards for different type of processors we must make sure that both match.

   Also there are various form factors in motherboards like 

• ATX(which is the big one and comes with more ram slots and adequate room for every component but cable management is hard),

• M-ATX(compared to ATX this micro ATX is small and has few number of slots and quite a small room for other components but the heat dissipation is high),

ITX OR Mini ATX(compared to mini ATX or ITX this ITX is small and has few number of slots and  also we can carry our cpu when ever are travelling)

INSTALLATION PROCESS   

• Install the motherboard in cabinet with provided screws in motherboard box carefully.
• Plan your cable management or get a guidance once you built one or two PC's you will surely get an idea.
• Always first install the processor and cooler fan in the Mother Board and then install the Motherboard in the Cabinet it is much easier and simpler way of  installing both processor and motherboard.   

Can't follow above instructions do watch this video on installing the Motherboard step by step

OTHER COMPONENTS AVAILABLE IN NEXT POST